- All products are added to your cart.
Adapters
OmniSwivel Gas Switch Block
The OmniSwivel Gas Switch Block allows a diver to change between two
separate air tanks without having to remove their full face mask. The
knob turns a full 180 degrees ensuring that there is no accidental
switching during the dive. The knob pointing to t
separate air tanks without having to remove their full face mask. The
knob turns a full 180 degrees ensuring that there is no accidental
switching during the dive. The knob pointing to t
More info
$349.99
($349.99 Incl. btw)
XS-HL404-DLX
Red colored visual indicator of closed position
Green colored visual indicator of open position
Install between standard regulator hose and second stage
9/16-18 UNF male inlet to 9/16-18 UNF female outlet threads
Slide machined Delrin collar to shut off g
Green colored visual indicator of open position
Install between standard regulator hose and second stage
9/16-18 UNF male inlet to 9/16-18 UNF female outlet threads
Slide machined Delrin collar to shut off g
More info
Sale
90 Degree LP Adapter
Make any primary regulator more comfortable while diving<ul>
<li>Routes the hose under the right arm instead of over the shoulder</li>
<li>Often used on octopus to improve hose routing</li>
<li>Installs between the second stage and the regulator hose</li>
<li>Routes the hose under the right arm instead of over the shoulder</li>
<li>Often used on octopus to improve hose routing</li>
<li>Installs between the second stage and the regulator hose</li>
More info
Sale
XS-HL404-38
Install between first stage low pressure port and standard regulator hose
3/8-24 UNF male inlet to 3/8-24 UNF female outlet threads
Slide machined Delrin collar to shut off gas flow
Prevent critical gas loss
Commonly used with rebreather systems
Low press
3/8-24 UNF male inlet to 3/8-24 UNF female outlet threads
Slide machined Delrin collar to shut off gas flow
Prevent critical gas loss
Commonly used with rebreather systems
Low press
More info
Sale
XS-AC970
-Extend the placement of low pressure port away from first stage
-3/8-24 female x 3/8-24 male
-16mm height
-Brass construction with black chrome finish
-Low pressure use only - below 200 psi
-Factory cleaned - Viton o-ring
-3/8-24 female x 3/8-24 male
-16mm height
-Brass construction with black chrome finish
-Low pressure use only - below 200 psi
-Factory cleaned - Viton o-ring
More info
Sale
XS-HL404
Install between standard regulator hose and second stage
9/16-18 UNF male inlet to 9/16-18 UNF female outlet threads
Slide machined Delrin collar to shut off gas flow
Prevent critical gas loss
Commonly used with deco rigs, stage bottles & drysuit inflatio
9/16-18 UNF male inlet to 9/16-18 UNF female outlet threads
Slide machined Delrin collar to shut off gas flow
Prevent critical gas loss
Commonly used with deco rigs, stage bottles & drysuit inflatio
More info
Sale
